Ford Mondeo since 2000
1. Introduction
2. Equipment
3. Care of the car
4. Engines
5. Greasing system
6. Cooling system
7. System of injection of fuel
7.1. It is sometimes rational to spend visual survey of system of injection
7.2. Check of inlet system on tightness
7.3. Check of frequency of rotation at idling
7.4. Fluctuations at idling – the regular phenomenon
7.5. Check of the adjusting valve of system of idling
7.6. Atomizer check
7.7. Replacement of draught of a pedal of gas (on example Duratec-HE)
7.8. Топливоснабжение the diesel engine – a base design
7.9. Visual check of system of injection of the diesel engine
7.10. Replacement of a filtering cartridge
8. Ignition system
9. Fuel system
10. Transmission
11. A running gear
12. Brake system
13. The electrotechnical equipment
14. Electroschemes
15. Car salon
16. A body
17. Technical characteristics
18. The help at malfunctions
 



ba88fb63





7-2-proverka-vpusknojj-sistemy-na-germetichnost.html

7.2. Check of inlet system on tightness

 PERFORMANCE ORDER

    Check up vacuum hoses on presence of cracks and good landing. Check up also all hoses of system of injection or an inlet collector (the gauge of absolute pressure, the brake amplifier, system of preparation of a gas mixture and so on). Warm up the engine and pass then to an idling mode. Consistently in injection system sprinkle all connections of hoses and фланцевые consolidations standard an aerosol for start-up of the cold engine: in those places where frequency of rotation of the engine at spraying there are leaks.

«The previous page
7.1. It is sometimes rational to spend visual survey of system of injection
The following page»
7.3. Check of frequency of rotation at idling