Ford Mondeo since 2000
1. Introduction
2. Equipment
3. Care of the car
4. Engines
5. Greasing system
6. Cooling system
7. System of injection of fuel
7.1. It is sometimes rational to spend visual survey of system of injection
7.2. Check of inlet system on tightness
7.3. Check of frequency of rotation at idling
7.4. Fluctuations at idling – the regular phenomenon
7.5. Check of the adjusting valve of system of idling
7.6. Atomizer check
7.7. Replacement of draught of a pedal of gas (on example Duratec-HE)
7.8. Топливоснабжение the diesel engine – a base design
7.9. Visual check of system of injection of the diesel engine
7.10. Replacement of a filtering cartridge
8. Ignition system
9. Fuel system
10. Transmission
11. A running gear
12. Brake system
13. The electrotechnical equipment
14. Electroschemes
15. Car salon
16. A body
17. Technical characteristics
18. The help at malfunctions
 



ba88fb63





7-5-proverka-regulirovochnogo-klapana-sistemy-kholostogo-khoda.html

7.5. Check of the adjusting valve of system of idling

 PERFORMANCE ORDER

    Start the engine at «constant gas». Include as much as possible токопотребителей (the EXPERT, illumination, the fan, heating of back glass and so forth) and turn a steering wheel from an emphasis against the stop. Frequency of rotation idling should fall quickly, however then quickly to be established on the ordered value. Check up the IAC-valve. As soon as the socket will be pulled out, the engine should stop. If is not present, replace the valve.

«The previous page
7.4. Fluctuations at idling – the regular phenomenon
The following page»
7.6. Atomizer check