|
The reason
|
Elimination
|
|
A.Starter is hard turned or at all does not work.
|
The control bulb burns low or dies away:
The Accumulator is discharged.
Wire connections are weakened or oxidised.
The Starter has connection to weight.
The control bulb brightly burns, press in a starter direction – quickly knock on the electromagnetic switch. If the starter still is not turned:
Coal brushes or their contacts in a starter are free.
Contacts in the electromagnetic switch are melted off (слиплись).
The starter Winding is damaged.
The control bulb brightly burns, starter noise are absent.
The Plug 1 in the electromagnetic switch is free.
Breakage in a wire to the plug 1 from the ignition lock-switch to the electromagnetic switch.
|
1a. Start the engine by means of a wire for starter connection to the auxiliary storage battery, move or tow off the car.
1б. Fix a wire, clean contacts, check up клиноребристый a belt.
1с. Repair a starter or replace.
2а. Repair a starter.
2б. Repair a starter or replace.
2с. Replace the electromagnetic switch, either repair a starter or replace.
3а. Check up contacts.
3б. Fix the plug.
3с. Check up a wire by means of a control lamp on current passage, check up the plug on durability of landing.
|
|
B.Starter works, however the engine is silent.
|
The gear wheel is polluted or worn out.
The returnable mechanism is clamped.
The cogwheel on an engine flywheel is damaged.
|
Clean or replace a gear wheel.
Repair a starter.
Establish 1st transfer and shift the car a little. Again start. It is necessary to replace defective details.
|
|
V.Elektromagnitnyj the switch joins rhythmically and switched off, the starter does not work.
|
| The storage battery is strongly discharged, starting pressure weak. |
Charge the accumulator. |
|
G.Starter continues to work, though the ignition key is not in start-up position.
|
The electromagnetic switch hangs or слиплись contacts.
The switch of ignition/starter the defective.
|
Switch off ignition, as a last resort disconnect the accumulator. Replace the electromagnetic switch, probably, it is necessary to replace a starter.
Replace the switch.
|
|
D.Shesternja does not leave gearing after engine start-up.
|
| The returnable spring of the returnable mechanism is defective, the drive of compulsory one-stage inclusion and gear wheel self-deenergizing is worn out. |
Switch off ignition, check up a starter on the test bed, replace defective details, if necessary replace a starter. |
