Ford Mondeo since 2000
1. Introduction
2. Equipment
3. Care of the car
4. Engines
5. Greasing system
6. Cooling system
6.1. A cooling liquid
6.2. Check of system of cooling on tightness
6.3. Check and доливка a cooling liquid
6.4. Replacement of a cooling liquid
6.5. Addition of a protection frame from замерзаниядо–30 °C
6.6. Dismantle and thermostat check – only at the cooled engine
6.7. First aid – перемкнуть a thermoswitch
6.8. Dismantle of the fan of system of cooling
6.9. Dismantle and radiator installation
6.10. Replacement of hoses of a cooling liquid
6.11. The air filter (the muffler of noise of an admission)
6.12. Clearing and replacement of a filtering cartridge
7. System of injection of fuel
8. Ignition system
9. Fuel system
10. Transmission
11. A running gear
12. Brake system
13. The electrotechnical equipment
14. Electroschemes
15. Car salon
16. A body
17. Technical characteristics
18. The help at malfunctions
 



ba88fb63





6-12-ochistka-i-zamena-filtrovalnogo-patrona.html

6.12. Clearing and replacement of a filtering cartridge

In our widths it is necessary to clean filtering elements at least once a year and to replace not later as in two years. New cartridges for the Mondeo need to be received at the dealer or to get in corresponding shops. Generally they can be not original spare details, however necessarily pay attention to quality of the goods. Sometimes on counters of autoshops substandard foreign products settle down. You at present, probably, will save ten roubles, however in due course your engine will take offence for such avarice – he «will inhale in itself(himself)» many pollution and thereof will prematurely wear out. On behalf of all Mondeo we as an example describe more low replacement in 1,8/2,0-литровых Mondeo.

12 months

 PERFORMANCE ORDER

    Dismantle a cover of the air filter from the case...

    System всасывания air in details:

    1 — the Inlet hose,
    2 — the Hose of ventilation of the engine,
    3 — the Cover of the case of the air filter,
    4 — the Filtering cartridge,
    5 — the Case of the air filter,
    6 — the Inlet hose,
    7 — the Inlet air chamber,
    8 — the Inlet hose.

    ... Uncover and pull out filtering element. Before use of a new filtering element clean the filter case together with a cover not fleecy rag or blow compressed air. Track that consolidation of the new filter around densely adjoined to a surface.

Procleaning of a filtering element

 PERFORMANCE ORDER

    Cautiously beat out filtering element about the firm basis. Thus it is possible to remove large dust particles. Small particles of a dust it is necessary to blow compressed air.

    — Blow an element only from the back party upwards. If you change a direction, the dust will be pressed even more strongly in a filter time.
    — Never clean the paper filter by means of a liquid which will hopelessly clog up filter pores. A consequence: capacity of the engine decreases, parametres of the fulfilled gas essentially worsen. Before installation of a filtering element track that condensing surfaces carefully adjoined to case details.

    Actions of the cleaner: Always blow a filtering element from below upwards. If damages on the film filter are revealed, at once replace the filter.


«The previous page
6.11. The air filter (the muffler of noise of an admission)
The following page»
7. System of injection of fuel