> Replacement of a cooling liquid. Ford Mondeo (since 2000 of release)
Ford Mondeo since 2000
1. Introduction
2. Equipment
3. Care of the car
4. Engines
5. Greasing system
6. Cooling system
6.1. A cooling liquid
6.2. Check of system of cooling on tightness
6.3. Check and доливка a cooling liquid
6.4. Replacement of a cooling liquid
6.5. Addition of a protection frame from замерзаниядо–30 C
6.6. Dismantle and thermostat check – only at the cooled engine
6.7. First aid – перемкнуть a thermoswitch
6.8. Dismantle of the fan of system of cooling
6.9. Dismantle and radiator installation
6.10. Replacement of hoses of a cooling liquid
6.11. The air filter (the muffler of noise of an admission)
6.12. Clearing and replacement of a filtering cartridge
7. System of injection of fuel
8. Ignition system
9. Fuel system
10. Transmission
11. A running gear
12. Brake system
13. The electrotechnical equipment
14. Electroschemes
15. Car salon
16. A body
17. Technical characteristics
18. The help at malfunctions
 






ba88fb63

6-4-zamena-okhlazhdayushhejj-zhidkosti.html

6.4. Replacement of a cooling liquid

 PERFORMANCE ORDER

  1. Lower system pressure by means of запорной covers of a broad tank. Be cautious, if the engine hot: danger обваривания.
  2. Establish pure reception capacity under a radiator and open a collar of the bottom hose of a cooling liquid or the drain screw of a back tank of a radiator.
  3. That the cooling liquid flew down is better, turn on запорную a cover of a broad tank. Merge a liquid and close reception capacity.
  4. Mount the bottom hose – thus use a new fixing collar. If the drain screw here it is necessary to use a new sealing ring has been unscrewed.
  5. Add in a broad tank the ordered cooling means, then add residual volume to approximately two millimetres below the top label whenever possible слабоизвестковой with tap water that there were no any more air vials.
  6. Start the engine and establish average frequencies of rotation. The engine should work until the thermostat will open. If necessary add слабоизвестковую tap water. Track that level in a tank at нагретом to working temperature the engine remained to constants.
  7. Screw up запорную a cover and spend a trial trip. During it you Mondeo will independently be ventilated.
  8. After a trial trip cautiously open запорную a cover of a broad tank and force to work the engine on average turns until the fan of system of cooling will join.
  9. If it is required, add cooling liquid before the top marks of a tank слабоизвестковой tap water.
  10. Do not forget to close a broad tank.

The previous page
6.3. Check and доливка a cooling liquid
The following page
6.5. Addition of a protection frame from замерзаниядо–30 C