Ford Mondeo since 2000
1. Introduction
2. Equipment
3. Care of the car
4. Engines
5. Greasing system
6. Cooling system
6.1. A cooling liquid
6.2. Check of system of cooling on tightness
6.3. Check and доливка a cooling liquid
6.4. Replacement of a cooling liquid
6.5. Addition of a protection frame from замерзаниядо–30 °C
6.6. Dismantle and thermostat check – only at the cooled engine
6.7. First aid – перемкнуть a thermoswitch
6.8. Dismantle of the fan of system of cooling
6.9. Dismantle and radiator installation
6.10. Replacement of hoses of a cooling liquid
6.11. The air filter (the muffler of noise of an admission)
6.12. Clearing and replacement of a filtering cartridge
7. System of injection of fuel
8. Ignition system
9. Fuel system
10. Transmission
11. A running gear
12. Brake system
13. The electrotechnical equipment
14. Electroschemes
15. Car salon
16. A body
17. Technical characteristics
18. The help at malfunctions
 



ba88fb63



6-9-demontazh-i-montazh-radiatora.html

6.9. Dismantle and radiator installation

 PERFORMANCE ORDER

    Preliminary strongly establish the car on a jack (goats). Disconnect a storage wire on weight (the plug 31), merge cooling liquid in reception capacity. Dismantle the electrofan as it is described above. Dismantle radiator hoses.

    Mondeo with the 2,5-litre engine and the diesel engine

    Lower a forward part of the car and dismantle the top hose of a radiator. Dismantle a hose on a broad tank with a cooling liquid and... ... Lift a forward part of the car.

    Mondeo with the 1,8-litre and 2,0-litre engine

    Dismantle a hose on a broad tank with a cooling liquid.

    Mondeo with the 2,0-litre diesel engine

    Dismantle a hose of a cooling liquid on an oil radiator...

    Dismantle of a hose of a cooling liquid (it is specified by an arrow) on an oil radiator.

    ... Unclench and dismantle a spring clip from an auxiliary frame.

    All models

    Now prop up the Expert-condenser, unscrew fixing screws, dismantle the electrofan together with a covering and pull out a radiator from holders. Dismantle a rubber support of a radiator.

    Dismantle of a rubber support of a radiator.

    Instal upside-down, pour a liquid and warm up the engine. Correct level of a cooling liquid in a broad tank to the top label. Spend a trial trip and after it check up all connections on tightness, add a missing cooling liquid to the top label.

«The previous page
6.8. Dismantle of the fan of system of cooling
The following page»
6.10. Replacement of hoses of a cooling liquid