> Harmonious work – current check in системезажигания. Ford Mondeo (since 2000 of release)
Ford Mondeo since 2000
1. Introduction
2. Equipment
3. Care of the car
4. Engines
5. Greasing system
6. Cooling system
7. System of injection of fuel
8. Ignition system
8.1. The ignition coil
8.2. Proof to a heat – spark plugs
8.3. Replacement of spark plugs – after 60 000 kilometres
8.4. Check by means of the universal device – the gauge of frequency of rotation
8.5. By means of the assistant to any problems – check of the gauge of pressure
8.6. Harmonious work – current check in системезажигания
8.7. It is carried out by means of the universal device – resistance measurement on the ignition coil
8.8. Dismantle of the block of ignition
8.9. Heating of the cold diesel engine – the device of a preliminary warming up
8.10. Check of the device of a preliminary warming up
8.11. Check of the relay of a preliminary warming up
8.12. Check of candles накаливания
9. Fuel system
10. Transmission
11. A running gear
12. Brake system
13. The electrotechnical equipment
14. Electroschemes
15. Car salon
16. A body
17. Technical characteristics
18. The help at malfunctions
 






ba88fb63

8-6-slazhennaya-rabota-proverka-toka-v-sistemezazhiganiya.html

8.6. Harmonious work – current check in системезажигания

 PERFORMANCE ORDER

  1. Disconnect any tip and unscrew a spark plug.
  2. Place the tip on the dismantled candle and put a candle together with the tip with irreproachable contact to weight on the block of cylinders. Cautiously at start, the candle should not slip.
  3. Let the assistant will start the engine.
  4. If now on candle electrodes there are strong categories and "cracklings" the ignition current is available are audible.
  5. If categories do not appear, something has deteriorated! In the beginning an eye of the expert check up ignition system if malfunctions it is not revealed, check up, whether the electric current flows in general.

The previous page
8.5. By means of the assistant to any problems – check of the gauge of pressure
The following page
8.7. It is carried out by means of the universal device – resistance measurement on the ignition coil