> Dismantle of the block of ignition. Ford Mondeo (since 2000 of release)
Ford Mondeo since 2000
1. Introduction
2. Equipment
3. Care of the car
4. Engines
5. Greasing system
6. Cooling system
7. System of injection of fuel
8. Ignition system
8.1. The ignition coil
8.2. Proof to a heat – spark plugs
8.3. Replacement of spark plugs – after 60 000 kilometres
8.4. Check by means of the universal device – the gauge of frequency of rotation
8.5. By means of the assistant to any problems – check of the gauge of pressure
8.6. Harmonious work – current check in системезажигания
8.7. It is carried out by means of the universal device – resistance measurement on the ignition coil
8.8. Dismantle of the block of ignition
8.9. Heating of the cold diesel engine – the device of a preliminary warming up
8.10. Check of the device of a preliminary warming up
8.11. Check of the relay of a preliminary warming up
8.12. Check of candles накаливания
9. Fuel system
10. Transmission
11. A running gear
12. Brake system
13. The electrotechnical equipment
14. Electroschemes
15. Car salon
16. A body
17. Technical characteristics
18. The help at malfunctions
 






ba88fb63

8-8-demontazh-bloka-zazhiganiya.html

8.8. Dismantle of the block of ignition

 PERFORMANCE ORDER

  1. Disconnect a wire of the storage battery and...
  2. ... Then disconnect cable connections on the ignition block.
  3. Then unscrew four fixing screws and remove the block from the holder.
  4. Mount the new block and tighten screws with effort 6 Нм.
  5. Track that the cable tip has been sideways fixed.
  6. Insert all wires of ignition as ignition into the block and...
  7. ... In end check up, whether all connections are strong.

    Fastens directly on a head of the block of cylinders: the ignition block.


The previous page
8.7. It is carried out by means of the universal device – resistance measurement on the ignition coil
The following page
8.9. Heating of the cold diesel engine – the device of a preliminary warming up