Ford Mondeo since 2000
1. Introduction
2. Equipment
3. Care of the car
4. Engines
5. Greasing system
6. Cooling system
7. System of injection of fuel
8. Ignition system
8.1. The ignition coil
8.2. Proof to a heat – spark plugs
8.3. Replacement of spark plugs – after 60 000 kilometres
8.4. Check by means of the universal device – the gauge of frequency of rotation
8.5. By means of the assistant to any problems – check of the gauge of pressure
8.6. Harmonious work – current check in системезажигания
8.7. It is carried out by means of the universal device – resistance measurement on the ignition coil
8.8. Dismantle of the block of ignition
8.9. Heating of the cold diesel engine – the device of a preliminary warming up
8.10. Check of the device of a preliminary warming up
8.11. Check of the relay of a preliminary warming up
8.12. Check of candles накаливания
9. Fuel system
10. Transmission
11. A running gear
12. Brake system
13. The electrotechnical equipment
14. Electroschemes
15. Car salon
16. A body
17. Technical characteristics
18. The help at malfunctions
 



ba88fb63





8-7-vypolnyaetsya-s-pomoshhyu-universalnogo-pribora-izmerenie-soprotivleniya.html

8.7. It is carried out by means of the universal device – resistance measurement on the ignition coil

Measurement assumes appropriate functioning of a control system by the engine. By means of the universal device in systems of ignition of a high voltage it is possible to check up also primary resistance in a verification mode (resistance W).

 PERFORMANCE ORDER

    Switch off ignition. Disconnect a wire of ignition from the ignition module.

    Check of primary resistance:
    Disconnect the multicontact tip. Consistently connect an ohmmeter to plugs 1 and 2, and also 3 and 2. Demanded value: 0,4 – 0,6 W.

    Conclusions of a multicontact socket.


«The previous page
8.6. Harmonious work – current check in системезажигания
The following page»
8.8. Dismantle of the block of ignition