Ford Mondeo since 2000
1. Introduction
2. Equipment
3. Care of the car
4. Engines
5. Greasing system
6. Cooling system
7. System of injection of fuel
8. Ignition system
9. Fuel system
10. Transmission
10.1. Coupling
10.2. Coupling check
10.3. Whether coupling is completely separated?
10.4. A five-step mechanical transmission
10.5. Gear change adjustment
10.6. Level check трансмиссионного oils (a mechanical transmission)
10.7. Good alternative to a mechanical transmission – automatic box Mondeo in a combination with 2,0-litre engine Duratec-HE
10.8. Level check трансмиссионного oils (an automatic transmission)
10.9. The main transfer
10.10. Check of cuffs of power shafts
10.11. Dismantle and power shaft installation / the cross-section lever of a suspension bracket
10.12. Replacement of cuffs карданного the hinge
11. A running gear
12. Brake system
13. The electrotechnical equipment
14. Electroschemes
15. Car salon
16. A body
17. Technical characteristics
18. The help at malfunctions
 



ba88fb63





10-5-naladka-pereklyucheniya-peredach.html

10.5. Gear change adjustment

If transfers to yours Mondeo are hooked or "have incorrectly a snack", it is unessential to get in a transmission – the side scene or switching draughts sometimes "plays pranks". At times also it is direct in a transmission "only transfer lever is clamped. While external factors of such"troubles"will be found out, the expert motorist on the basis of the experience only with the big luck and still a great patience again will put all in order. That both тросовые draughts – draught of switching white, draught of management accordingly black – it is possible properly юстировать, it is necessary, naturally, special tool (Ford 16-097). Workers of services Ford establish it sideways on a mouth of a cover of a transmission. It was necessary to establish the switching lever in neutral position earlier and to park Mondeo on an elevating platform. If transfers critically "weigh" the talent "are really clamped" in your car – can be, such malfunctions are better to eliminate in workshops Ford.

In the absence of the special tool the luck and persistence are necessary: adjustment of draughts of switching.


«The previous page
10.4. A five-step mechanical transmission
The following page»
10.6. Level check трансмиссионного oils (a mechanical transmission)