> Door adjustment. Ford Mondeo (since 2000 of release)
Ford Mondeo since 2000
1. Introduction
2. Equipment
3. Care of the car
4. Engines
5. Greasing system
6. Cooling system
7. System of injection of fuel
8. Ignition system
9. Fuel system
10. Transmission
11. A running gear
12. Brake system
13. The electrotechnical equipment
14. Electroschemes
15. Car salon
16. A body
16.1. Dismantle and door installation
16.2. Door adjustment
16.3. Dismantle and installation of an external rear-view mirror
16.4. Dismantle and installation обтекателя
16.5. Dismantle and cowl installation
16.6. Adjustment of a cowl of the engine
16.7. Dismantle and installation of a cover of a bumper (forward)
16.8. Dismantle and installation of wings
16.9. Dismantle and installation of a cover of a bumper (back)
16.10. Dismantle and installation of a cover of a luggage carrier
16.11. Adjustment of a cover of a luggage carrier
16.12. Dismantle and installation of the lock of a back door
17. Technical characteristics
18. The help at malfunctions
 






ba88fb63

16-2-regulirovka-dveri.html

16.2. Door adjustment

Put the Mondeo whenever possible on a horizontal surface and open the warped door. At open "gate" it is more convenient to work with fixing screws of door loops.

 PERFORMANCE ORDER

  1. Release fixing screws of loops exactly so that the door could be closed after easy pressing on it or it was possible to carry out rotary movements for a door part. If screws to turn off it is more, the door can "depart" from steep position.
  2. Then close a door and level it so that its ends were on one straight line with a body and the size of backlashes was approximately uniform. If the door carelessly defends from an average or back rack release also in addition a wedge for заключки and displace it together with a door in a corresponding direction.
  3. Remove the external door handle and, slightly having raised, open a door.
  4. Keep a door in this position and simultaneously tighten all fixing screws.
  5. Close a door, check up its landing and if necessary correct once again.

The previous page
16.1. Dismantle and door installation
The following page
16.3. Dismantle and installation of an external rear-view mirror