> Screen wiper. Ford Mondeo (since 2000 of release)
Ford Mondeo since 2000
1. Introduction
2. Equipment
3. Care of the car
4. Engines
5. Greasing system
6. Cooling system
7. System of injection of fuel
8. Ignition system
9. Fuel system
10. Transmission
11. A running gear
12. Brake system
13. The electrotechnical equipment
14. Electroschemes
15. Car salon
16. A body
17. Technical characteristics
18. The help at malfunctions
18.1. A starter
18.2. The accumulator and the generator
18.3. System of injection of gasoline
18.4. Brakes
18.5. Injection system - a diesel engine
18.6. Electric стеклоподъемник
18.7. A heating system
18.8. Cooling system
18.9. Coupling
18.10. The engine and system
18.11. Braking signals
18.12. A screen wiper
18.13. Greasing system
18.14. The thermostat
18.15. System of the sound and light alarm system
18.16. Screen wiper brushes
18.17. System of locks with the central management
18.18. Spark plugs
18.19. A lining of a head of the block of cylinders
 






ba88fb63

18-12-stekloochistitel.html

18.12. A screen wiper

The reason
Elimination
As A.Stekloochistiteli of a windshield do not work.
  1. Defective safety lock.
  2. Defect in the interval relay.
  3. The crank of a drive of screen wipers was disconnected.
  4. Breakage in a wire to the switch of the engine of a screen wiper.
  5. Breakage in a wire to the screen wiper engine.
  6. Has burnt down the electric motor of screen wipers or coal brushes are worn out.
  1. Replace.
  2. Check up connections, replace the relay.
  3. Screw strongly.
  4. Check up wires and штекерные connections.
  5. Check up wires and штекерные connections.
  6. Replace.
As B.Stekloochistiteli of back glass do not work.
  1. Look А1.
  2. Look А4 and А5.
  3. Look А6.
As V.Stekloochistiteli do not work for I speed.
  1. Weak contacts.
  2. Consumption of a current by the screen wiper engine is interrupted.
  3. Токопроходимость on the switch of the engine of screen wipers it is interrupted.
  1. Check up connections on токопроходимость.
  2. Replace the engine.
  3. Replace the switch.
As G.Stekloochistiteli do not work for II speed.
  1. Токопроходимость on the switch of the engine of screen wipers it is interrupted.
  2. Contacts of the switch of a screen wiper are worn out.
  3. Consumption of a current by the screen wiper engine is interrupted.
  1. Check up conducting.
  2. Replace the switch.
  3. Replace the engine.
D.Stekloochistiteli do not come back in a starting position.
  1. Breakage in wires of plugs 53Е between the switch of a screen wiper and the engine
  2. The engine of screen wipers is faulty.
  1. Check up wires.
  2. Check up a control lamp: between the plug 53Е and weight (the plug 31) the lamp should burn constantly. Between the plug 53Е and the plug 31 lamp should go out quickly before achievement of a position of rest. At opposite check between the plug 53Е and plus of the accumulator the lamp should light up quickly before achievement of a position of rest. If is not present, replace the engine.
As E.Stekloochistiteli do not work in a faltering mode.
  1. The relay of stekloomyvatelej/screen wipers is faulty.
  2. Rupture in a wire between the switch of screen wipers and the relay.
  3. Defect in contacts of the switch of screen wipers.
  4. Breakage in connection between a box of safety locks to the interval relay or between the relay to the screen wiper engine.
  1. Replace.
  2. Check up a wire.
  3. Replace the switch.
  4. Check up a safety lock, wires, including штекерные connections.
Z.Ne is disconnected a faltering operating mode of screen wipers.
  1. Look Д1.
  2. Look Е1.
  3. Contact in the switch of screen wipers is worn out.
  1. Replace the switch.
Z.Posle of deenergizing of screen wipers they do not remain in a position of rest or remain quickly.
The polluted or insufficiently sliding contact in the engine of screen wipers. Disassemble the engine of screen wipers, smooth out contacts. If necessary replace the engine.

The previous page
18.11. Braking signals
The following page
18.13. Greasing system