Ford Mondeo since 2000
1. Introduction
2. Equipment
3. Care of the car
4. Engines
5. Greasing system
6. Cooling system
7. System of injection of fuel
8. Ignition system
9. Fuel system
10. Transmission
11. A running gear
12. Brake system
13. The electrotechnical equipment
14. Electroschemes
15. Car salon
16. A body
17. Technical characteristics
18. The help at malfunctions
18.1. A starter
18.2. The accumulator and the generator
18.3. System of injection of gasoline
18.4. Brakes
18.5. Injection system - a diesel engine
18.6. Electric стеклоподъемник
18.7. A heating system
18.8. Cooling system
18.9. Coupling
18.10. The engine and system
18.11. Braking signals
18.12. A screen wiper
18.13. Greasing system
18.14. The thermostat
18.15. System of the sound and light alarm system
18.16. Screen wiper brushes
18.17. System of locks with the central management
18.18. Spark plugs
18.19. A lining of a head of the block of cylinders
 



ba88fb63





18-19-prokladka-golovki-bloka-cilindrov.html

18.19. A lining of a head of the block of cylinders

Recognition sign
The reason/feature
And. The cooling liquid is regularly added. The cooling liquid in small volume gets to the combustion chamber. Such condition without signs can last long time.
B.Znachitelnye of loss of cooling means. At нагретом the engine also there is a release of a white loop of the fulfilled gas. Cooling means in great volume gets into the combustion chamber, there turns to steam and leaves in quality of "water steam» an exhaust pipe.
V.Iz of an open compensatory tank air vials rise, at opening запорной covers the cooling liquid under pressure is splashed out from a tank or a radiator. The engine throws fulfilled gases in cooling system. From a ventilating aperture smells as the fulfilled gases.
The film Pouring by motley colours floats on a cooling liquid. Engine oil has got into cooling system.
D.Emulsija of grayish colour appears on щупе for check of level of oil, engine oil is penetrated by water vials. The cooling liquid has got to engine oil. The lining of a head of the block of cylinders or a head of the block of cylinders is defective. It is necessary to spend diagnosing of damages immediately. To tow off the car for repair in a workshop. Attention: water in engine oil leads to damages of bearings.

«The previous page
18.18. Spark plugs