> Greasing system. Ford Mondeo (since 2000 of release)
Ford Mondeo since 2000
1. Introduction
2. Equipment
3. Care of the car
4. Engines
5. Greasing system
6. Cooling system
7. System of injection of fuel
8. Ignition system
9. Fuel system
10. Transmission
11. A running gear
12. Brake system
13. The electrotechnical equipment
14. Electroschemes
15. Car salon
16. A body
17. Technical characteristics
18. The help at malfunctions
18.1. A starter
18.2. The accumulator and the generator
18.3. System of injection of gasoline
18.4. Brakes
18.5. Injection system - a diesel engine
18.6. Electric стеклоподъемник
18.7. A heating system
18.8. Cooling system
18.9. Coupling
18.10. The engine and system
18.11. Braking signals
18.12. A screen wiper
18.13. Greasing system
18.14. The thermostat
18.15. System of the sound and light alarm system
18.16. Screen wiper brushes
18.17. System of locks with the central management
18.18. Spark plugs
18.19. A lining of a head of the block of cylinders
 






ba88fb63

18-13-sistema-smazki.html

18.13. Greasing system

The reason

Elimination
A.Kontrolnaja a bulb of pressure of oil at the included ignition remains dark.
  1. The control bulb of pressure of oil is defective.
  2. Shtekernoe connection корродированно or breakage in cable connection.
  3. The hydraulic switch defective.
  1. Replace.
  2. Check up and clean, if necessary replace a wire.
  3. Check up, if necessary replace.
B.Kontrolnaja a bulb of pressure of oil decays at нагретом the engine idling and dies away at increase of frequency of rotation.
Hot and consequently liquid oil.
Whenever possible pass to oil with the raised viscosity.
V.Kontrolnaja a bulb of pressure of oil dies away only at the big frequencies of rotation.
The perepusknoj valve basically маслопроводе негерметичен.  Check up pressure of oil, if necessary replace the valve.
G.Kontrolnaja a bulb of pressure of oil lights up only at start-up of the engine and does not die away even at gas giving.
  1. There is not enough oil in the engine.
  2. Grid of the receiver of the oil pump the pump is defective or worn out.
  3. Look А2 and А3.
  1. Check up oil level, if necessary add.
  2. Check up and if necessary replace.
  3. To move further only when the reason it is established.

The previous page
18.12. A screen wiper
The following page
18.14. The thermostat