Ford Mondeo since 2000
1. Introduction
2. Equipment
3. Care of the car
4. Engines
5. Greasing system
6. Cooling system
7. System of injection of fuel
8. Ignition system
9. Fuel system
10. Transmission
11. A running gear
12. Brake system
12.1. Check of level of a brake liquid
12.2. Check of brake system
12.3. Check of the amplifier of a brake drive
12.4. Check of brakes on functioning
12.5. Deterioration measurement колодок the disk brake mechanism
12.6. Check износадискового the brake mechanism
12.7. Prorolling of brake system
12.8. Replacement of a brake liquid
12.9. Dismantle of a compensatory tank of the main brake cylinder
12.10. Dismantle and installation of the main brake cylinder
12.11. Dismantle and installation of the amplifier of a brake drive
12.12. Dismantle and installation of brake hoses
12.13. Replacement колодок the disk brake mechanism
12.14. Replacement of disks of the brake mechanism
12.15. To make suitable a support and the piston of the brake mechanism – replacement of protective cuffs
12.16. A lay brake
12.17. Replacement of a cable of a lay brake
13. The electrotechnical equipment
14. Electroschemes
15. Car salon
16. A body
17. Technical characteristics
18. The help at malfunctions
 



ba88fb63 Шлюхи, девочки индивидуалки волгограда.



12-10-demontazh-i-montazh-glavnogo-tormoznogo-cilindra.html

12.10. Dismantle and installation of the main brake cylinder

Be convinced before демонтажем ГТЦ that in the amplifier of a brake drive there is no lowered pressure. For this purpose disconnect or the pipeline of low pressure from the amplifier, or "pump over" a brake pedal at the stopped engine while the effort to a pedal does not become "appreciable".

 PERFORMANCE ORDER

    Dismantle the pipeline of low pressure from the amplifier of a brake drive and... ... Disconnect the main socket from a cover of a compensatory tank. Unscrew запорную a cover from a tank and put it, having turned, on a pure basis. Suck away a brake liquid from a compensatory tank by means of a pipette or a syringe.

    Models with a mechanical transmission
    Disconnect a connecting hose from the cylinder of the gauge of coupling and close an aperture that the dirt has not got to it.

    All models
    Dismantle both pipelines (are specified by arrows) from the main brake cylinder and close their ends.

    Dismantle of both pipelines from the main brake cylinder and closing of the ends заглушками.

    Now dismantle the main brake cylinder together with a compensatory tank of a brake liquid (places are specified by arrows) from the amplifier of a brake drive.

    Dismantle of the main brake cylinder with a compensatory tank.

    Mount new ГТЦ with new vacuum linings. Slightly grease a lining with vaseline and clean surfaces adjoining the amplifier. Otherwise from these places in the amplifier extraneous air and thereof its effect of strengthening will be lowered can get or in general to be absent. In cars with EVE check up correctness of a choice of design ГТЦ – standard cylinders here do not approach. Spend the further installation upside-down and then pump over brake system as it is described above.

The previous page
12.9. Dismantle of a compensatory tank of the main brake cylinder
The following page
12.11. Dismantle and installation of the amplifier of a brake drive