Ford Mondeo since 2000
1. Introduction
2. Equipment
3. Care of the car
4. Engines
5. Greasing system
6. Cooling system
7. System of injection of fuel
8. Ignition system
9. Fuel system
10. Transmission
11. A running gear
12. Brake system
12.1. Check of level of a brake liquid
12.2. Check of brake system
12.3. Check of the amplifier of a brake drive
12.4. Check of brakes on functioning
12.5. Deterioration measurement колодок the disk brake mechanism
12.6. Check износадискового the brake mechanism
12.7. Prorolling of brake system
12.8. Replacement of a brake liquid
12.9. Dismantle of a compensatory tank of the main brake cylinder
12.10. Dismantle and installation of the main brake cylinder
12.11. Dismantle and installation of the amplifier of a brake drive
12.12. Dismantle and installation of brake hoses
12.13. Replacement колодок the disk brake mechanism
12.14. Replacement of disks of the brake mechanism
12.15. To make suitable a support and the piston of the brake mechanism – replacement of protective cuffs
12.16. A lay brake
12.17. Replacement of a cable of a lay brake
13. The electrotechnical equipment
14. Electroschemes
15. Car salon
16. A body
17. Technical characteristics
18. The help at malfunctions
 



ba88fb63





12-8-zamena-tormoznojj-zhidkosti.html

12.8. Replacement of a brake liquid

Provide the Mondeo each two years with a new brake liquid. Special workshops will offer you for this procedure the corresponding filling in device. However you can independently spend such work – it is a little similar to process of prorolling of brake system. For filling of all system it is necessary about 1,5 l of a brake liquid (consider the specification).

24 months

 PERFORMANCE ORDER

    Suck away an old brake liquid from a compensatory tank by means of a pipette or a pure syringe for injections. All other working actions are similar to the actions used at prorolling of brake system. Thus in an operating time with the wheel brake cylinder wait until on a hose for prorolling the pure liquid will not go. This condition can be distinguished on colour: the old brake liquid has «a dairy shade».

«The previous page
12.7. Prorolling of brake system
The following page»
12.9. Dismantle of a compensatory tank of the main brake cylinder