Ford Mondeo since 2000
1. Introduction
2. Equipment
3. Care of the car
4. Engines
5. Greasing system
6. Cooling system
7. System of injection of fuel
8. Ignition system
9. Fuel system
10. Transmission
11. A running gear
12. Brake system
13. The electrotechnical equipment
13.1. The storage battery and a starter
13.2. The generator
13.3. Check of level of electrolit in the accumulator
13.4. Care of contacts
13.5. Check of the storage battery
13.6. Engine start "from outside" – with a wire connecting a starter and the auxiliary storage battery, without problems
13.7. Car pushing
13.8. Car towage
13.9. Gymnastics of the storage battery
13.10. Replacement of the storage battery
13.11. Revealing of secret consumers of the electric power
13.12. Check of a regulator of pressure
13.13. Replacement приводных belts
13.14. Replacement of a belt clamping roller
13.15. Dismantle and generator installation
13.16. Starter replacement
13.17. External illumination
13.18. Any big problems – replacement of lamps накаливания
13.19. A provisional measure – adjustment of headlights «before a wall»
13.20. Signalling devices
13.21. Check of the switch of a signal of braking
13.22. Check of a sound signal
13.23. Tools and actuation devices
13.24. Check of functioning of the switch
13.25. Dismantle and installation of the combined device
13.26. Not always simply to follow – "twisting" roads of wires
13.27. Protection against overloads – safety locks in salon and a motor compartment
13.28. It is carried out quickly – replacement of safety locks
13.29. Distributes strong working currents – the switching relay
13.30. An apportion of safety locks and the relay
14. Electroschemes
15. Car salon
16. A body
17. Technical characteristics
18. The help at malfunctions



13.16. Starter replacement

If the starter of yours Mondeo arranges "strikes" more often some components participate in it. The electromagnetic switch or sliding electrographite contacts, for example, can be clamped or worn out. Besides, the shaft anchor can appear clamped in the «a storage place». Before going for repair carrying out to the house machine tool, all the same think better of a replaceable starter or already earlier used unit from recently had an accident car. Ford still offers the complete set of a replaceable starter as the spare unit.


    Duratec-HE, DuraTorg-DI

    Disconnect earthing wire of the accumulator and... ... Raise and reliably fix a forward part of the car.

    Dismantle the bottom facing of the engine.

    All models
    Dismantle a mudguard.

    Release the inlet pipeline of the fan надувочного air from a soaking up tube, for this purpose... ... That then to dismantle soaking up hose from inlet and the EGR-pipeline. Remove then the TMAR-GAUGE and...

    TMAR-GAUGE removal.

    ... Dismantle the inlet pipeline.

    All models
    Release an arm of a cable bunch and put it aside. Now dismantle both connecting wires from the electromagnetic switch.

    Dismantle back fastening of a starter (it is specified by arrows)...

    Dismantle of back fastening of a starter.

    All models
    B... Unscrew forward screws (are specified by arrows), pull out a starter from картера couplings and utilise an old lining.

    Unscrew forward screws (are specified by arrows) a starter and pull out it from картера couplings.

    In the beginning establish back fastening of a starter and strong tighten a nut. Before installation check up, whether the cover (it is specified by an arrow) in the transmission case correctly takes places.

    Check up cover placing (it is specified by an arrow) in the transmission case.

    All models
    Mount a new starter with a new lining and tighten forward фланцевые screws the moment of an inhaling 25 Н·м. Finish installation, depending on car type, upside-down.

«The previous page
13.15. Dismantle and generator installation
The following page»
13.17. External illumination