Ford Mondeo since 2000
1. Introduction
2. Equipment
3. Care of the car
4. Engines
5. Greasing system
6. Cooling system
7. System of injection of fuel
8. Ignition system
9. Fuel system
10. Transmission
11. A running gear
12. Brake system
13. The electrotechnical equipment
13.1. The storage battery and a starter
13.2. The generator
13.3. Check of level of electrolit in the accumulator
13.4. Care of contacts
13.5. Check of the storage battery
13.6. Engine start "from outside" – with a wire connecting a starter and the auxiliary storage battery, without problems
13.7. Car pushing
13.8. Car towage
13.9. Gymnastics of the storage battery
13.10. Replacement of the storage battery
13.11. Revealing of secret consumers of the electric power
13.12. Check of a regulator of pressure
13.13. Replacement приводных belts
13.14. Replacement of a belt clamping roller
13.15. Dismantle and generator installation
13.16. Starter replacement
13.17. External illumination
13.18. Any big problems – replacement of lamps накаливания
13.19. A provisional measure – adjustment of headlights «before a wall»
13.20. Signalling devices
13.21. Check of the switch of a signal of braking
13.22. Check of a sound signal
13.23. Tools and actuation devices
13.24. Check of functioning of the switch
13.25. Dismantle and installation of the combined device
13.26. Not always simply to follow – "twisting" roads of wires
13.27. Protection against overloads – safety locks in salon and a motor compartment
13.28. It is carried out quickly – replacement of safety locks
13.29. Distributes strong working currents – the switching relay
13.30. An apportion of safety locks and the relay
14. Electroschemes
15. Car salon
16. A body
17. Technical characteristics
18. The help at malfunctions



13.19. A provisional measure – adjustment of headlights «before a wall»

If you wish decently and to adjust faster light find whenever possible a dark wall as the screen and spend following actions:


    Fill in completely the Mondeo or put in a luggage carrier about 30 kg of excess weight – at approximately half filled tank. Plant the assistant on a seat of the driver or alternatively place in the right space for feet of weight of 75 kg. Check up presence of the ordered pressure in tyres. "Park" the car precisely in five metres from a dark background (wall). Before "starting to work", strongly and repeatedly in front and behind press shock-absorbers of the car and... ... Establish a regulator of an inclination of headlights in position «0».

    Make quickly: transfer «light points» on a wall.

    Measure distance between a surface of the earth and the centres of both headlights. These sizes transfer on a wall and connect points line S1. On five centimetres draw on a wall E.Ona's parallel line characterises a passing light inclination on five metres of distance more low. Look through back glass and ask the assistant «отрисовать» from the car centre a perpendicular line of M. Now measure distance between the car and points of the centres of headlights (on the right and at the left). Transfer these values on auxiliary line S1 (on the right and to the left of a point of intersection of both lines of M and S1) and mark with their adjusting daggers S2. Precisely on five centimetres below these daggers correct on an adjusting line of a point of crisis of a passing light. If you Mondeo possesses antifog headlights spend with them similar work. Construct an auxiliary line with adjusting daggers (the centres of antifog headlights). You "will find" adjusting screws of headlights under an engine cowl from above both headlights. The internal screw 1 regulates position of a reflector in a vertical direction, the external screw 2, on the contrary, in the horizontal.

    Under an engine cowl adjusting screws of headlights.

    Include a passing light and... ... Rotate the vertical adjusting screw 1 until the horizontal light-to-dark border of a passing light will not be co-ordinated with an adjusting line. Then rotate the lateral adjusting screw 2 from the interior of an antifog headlight to those while while in a picture of a passing light the crisis point will not coincide with an adjusting dagger. «The dispersion share» in 15 % can settle down over a line. After such adjustment automatically «becomes correct» and a headlight.

«The previous page
13.18. Any big problems – replacement of lamps накаливания
The following page»
13.20. Signalling devices