Ford Mondeo since 2000
1. Introduction
2. Equipment
3. Care of the car
4. Engines
5. Greasing system
6. Cooling system
7. System of injection of fuel
8. Ignition system
9. Fuel system
10. Transmission
11. A running gear
12. Brake system
13. The electrotechnical equipment
14. Electroschemes
15. Car salon
15.1. Ventilation and heating
15.2. From time to time to inspect heating and ventilation systems
15.3. Dismantle of the block of management by heating and ventilation
15.4. The fan
15.5. Search of malfunctions of the fan
15.6. Replacement of the engine of the fan
15.7. Replacement of lamps of salon
15.8. The switch
15.9. Coding ключазажигания
15.10. Check of the door contact switch
15.11. Radio receiver dismantle
15.12. Dismantle dynamics
15.13. Dismantle of the external aerial
15.14. It is not recommended – to dismantle forward seats independently
15.15. Dismantle of a back of back seats
15.16. Dismantle of an upholstery of a door in front
15.17. Dismantle of lateral glasses / стеклоподъемника
15.18. Стеклоподъемник
15.19. Engine adjustment стеклоподъемника
15.20. Dismantle of the door handle
15.21. Dismantle of the lock of a steering
16. A body
17. Technical characteristics
18. The help at malfunctions
 



ba88fb63



15-21-demontazh-zamka-rulevogo-upravleniya.html

15.21. Dismantle of the lock of a steering

 PERFORMANCE ORDER

    Disconnect the storage battery. Release screws 1 and clips 2 protective facings under a steering column.

    Dismantle protective facing under a steering column. 1 screws, 2 Clips.

    If in yours Mondeo there is a remote control radio system further it is necessary to release by means of a narrow screw-driver a lock clamp from back facing of a column of a steering and … … then to remove the connecting tip on the remote control switch. Further dismantle the switch. Separate now the top facing of a column from the bottom. For this purpose on both parties release a lock clamp 1 by means of a narrow screw-driver and remove facing 2.

    Separate facing of a column of a steering and remove the top facing 2. 1 Lock clamp.

    Now dismantle the bottom facing of a column of a steering (screws are specified by arrows).

    Dismantle of the bottom facing of a column of a steering (screws are specified by arrows).

    Dismantle priemo-transferring block PATS. For the best orientation we will show it at the dismantled steering wheel.

    Dismantle of priemo-transferring block PATS.

    Now dismantle the steering lock. For this purpose turn the ignition key 1 in position I and press blocking mechanism 2 narrow screw-driver into the ignition lock-switch. Then completely pull out the lock cylinder.

    Turn the ignition key 1 in position I, press blocking mechanism 2 and pull out the lock of a steering with the ignition key.

    Instal upside-down.

The previous page
15.20. Dismantle of the door handle
The following page
16. A body