Ford Mondeo since 2000
1. Introduction
2. Equipment
3. Care of the car
3.1. Internal clearing – at a dirt is not present any chances
3.2. An external sink
3.3. An engine sink
3.4. That all remains in movement, address in greasing service
3.5. Wish to keep material assets – look after colouring
3.6. Care of varnishing
3.7. Decrease in value of the goods – ugly defects of colouring
3.8. Elimination of defects from blows of stones
3.9. Polishing of small scratches
3.10. Elimination of large scratches
3.11. Installation for a sink of glasses
3.12. Check of a screen wiper and стеклоомывателя
3.13. Water pouring in стеклоомыватель
3.14. Replacement of rubber of a brush of a screen wiper
3.15. Nozzle installation стеклоомывателя
3.16. Installation and nozzle dismantle стеклоомывателя
3.17. Dismantle and installation of the lever of a screen wiper
3.18. Dismantle and installation of the electric motor of a forward screen wiper
3.19. Dismantle and installation of the electric motor of a back screen wiper
4. Engines
5. Greasing system
6. Cooling system
7. System of injection of fuel
8. Ignition system
9. Fuel system
10. Transmission
11. A running gear
12. Brake system
13. The electrotechnical equipment
14. Electroschemes
15. Car salon
16. A body
17. Technical characteristics
18. The help at malfunctions
 



ba88fb63



3-13-zalivka-vody-v-stekloomyvatel.html

3.13. Water pouring in стеклоомыватель

 PERFORMANCE ORDER

    In summertime it is necessary to resupply constantly waters for стеклоомывателя. Entering of a share of a cleaner considerably raises effect of washing. In the winter besides it in a water solution it is added in addition антиобледенительное means or it is used already ready «стеклоочистительная» a mix. That in a tank стелоомывателя the homogeneous mix was created, in the beginning it is necessary to pour additional means, and only after that to fill in with a solution up to a ventilating aperture. At negative temperatures стеклоомыватель can freeze. Therefore "fill" the tank in a cold season always approximately on third противозамерзающим means (for example, denatured alcohol) or "a ready" cleaning solution. That in serious situations to protect also wires and nozzles, after filling process it is necessary to "pump over" стеклоомыватель until the mix will not appear on glasses and will smell.

    With the filling indicator: запорная a tank cover стеклоомывателя.


«The previous page
3.12. Check of a screen wiper and стеклоомывателя
The following page»
3.14. Replacement of rubber of a brush of a screen wiper