Ford Mondeo since 2000
1. Introduction
2. Equipment
3. Care of the car
3.1. Internal clearing – at a dirt is not present any chances
3.2. An external sink
3.3. An engine sink
3.4. That all remains in movement, address in greasing service
3.5. Wish to keep material assets – look after colouring
3.6. Care of varnishing
3.7. Decrease in value of the goods – ugly defects of colouring
3.8. Elimination of defects from blows of stones
3.9. Polishing of small scratches
3.10. Elimination of large scratches
3.11. Installation for a sink of glasses
3.12. Check of a screen wiper and стеклоомывателя
3.13. Water pouring in стеклоомыватель
3.14. Replacement of rubber of a brush of a screen wiper
3.15. Nozzle installation стеклоомывателя
3.16. Installation and nozzle dismantle стеклоомывателя
3.17. Dismantle and installation of the lever of a screen wiper
3.18. Dismantle and installation of the electric motor of a forward screen wiper
3.19. Dismantle and installation of the electric motor of a back screen wiper
4. Engines
5. Greasing system
6. Cooling system
7. System of injection of fuel
8. Ignition system
9. Fuel system
10. Transmission
11. A running gear
12. Brake system
13. The electrotechnical equipment
14. Electroschemes
15. Car salon
16. A body
17. Technical characteristics
18. The help at malfunctions
 



ba88fb63





3-4-chtoby-vse-ostavalos-v-dvizhenii-obratites-v-sluzhbu-smazyvaniya.html

3.4. That all remains in movement, address in greasing service

Who well greases, that well and goes – the oil droplet, well dosed out pinch of greasing or a drop of the added silicone sometimes do miracles: easily mobile there is everything that is squeezed, clamped, it is necessary to tear off or has rusted. Faust's following rule should be taken into consideration: everywhere there, for example, in hinges and joints with close landing where the greasing cannot get, the first choice is oil or lubricant an aerosol. Rubbing the friend about the friend of a surface, on the contrary, are greased better with lubricant paste or silicone greasing.

    Loops of doors, cowl of the engine and back door can sometimes manage and an oil drop. Adjusting fastening of doors remains in "the sports" form after a small dose of universal greasing. Zamkovye latches of doors, cowl of the engine and back door are expedient for processing sprayed greasing or lubricant paste. In those places where are visible тросовые draughts, for example, on замковые cowl plates it is put a few greasings and by means of repeated movement of the lever it gets in обмазку draughts. It is necessary to supply zamkovye cylinders and the beginnings of the cold period directing not later for the winter silicone with an aerosol: silicone greases, supersedes a moisture and protects from corrosion. Therefore the strong frost does not have any chances to block the lock. The bottom bolt of a cover of the bearing lock скобы a cowl should be oiled. Loops of a cowl of the engine are oiled or humidified lubricant with an aerosol.

«The previous page
3.3. An engine sink
The following page»
3.5. Wish to keep material assets – look after colouring