Ford Mondeo since 2000
1. Introduction
2. Equipment
3. Care of the car
3.1. Internal clearing – at a dirt is not present any chances
3.2. An external sink
3.3. An engine sink
3.4. That all remains in movement, address in greasing service
3.5. Wish to keep material assets – look after colouring
3.6. Care of varnishing
3.7. Decrease in value of the goods – ugly defects of colouring
3.8. Elimination of defects from blows of stones
3.9. Polishing of small scratches
3.10. Elimination of large scratches
3.11. Installation for a sink of glasses
3.12. Check of a screen wiper and стеклоомывателя
3.13. Water pouring in стеклоомыватель
3.14. Replacement of rubber of a brush of a screen wiper
3.15. Nozzle installation стеклоомывателя
3.16. Installation and nozzle dismantle стеклоомывателя
3.17. Dismantle and installation of the lever of a screen wiper
3.18. Dismantle and installation of the electric motor of a forward screen wiper
3.19. Dismantle and installation of the electric motor of a back screen wiper
4. Engines
5. Greasing system
6. Cooling system
7. System of injection of fuel
8. Ignition system
9. Fuel system
10. Transmission
11. A running gear
12. Brake system
13. The electrotechnical equipment
14. Electroschemes
15. Car salon
16. A body
17. Technical characteristics
18. The help at malfunctions
 



ba88fb63





3-9-polirovka-melkikh-carapin.html

3.9. Polishing of small scratches

 PERFORMANCE ORDER

    Preliminary thoroughly clean a damage place промывочным gasoline or solvent. Polish extraneous colours (if are available) in some working passes by means of polishing cotton wool, grinding полиролем or a varnish cleaner. Track in order that the polishing area was whenever possible small. Carefully grind in the beginning the "pulled out" edges of a scratch a small strip of a water grinding paper (the minimum granularity 800). Thus constantly moisten a grinding paper and inject into a place of polishing water. Attention: do not grind a layer of an integumentary varnish. Polish a damage place soft полиролем. Thus distribute paint particles outside in a scratch. Then cover the processed place with varnish preservative. If you give to luster great value in end polish all car.

«The previous page
3.8. Elimination of defects from blows of stones
The following page»
3.10. Elimination of large scratches