> Dismantle and installation of the electric motor of a forward screen wiper. Ford Mondeo (since 2000 of release)
Ford Mondeo since 2000
1. Introduction
2. Equipment
3. Care of the car
3.1. Internal clearing – at a dirt is not present any chances
3.2. An external sink
3.3. An engine sink
3.4. That all remains in movement, address in greasing service
3.5. Wish to keep material assets – look after colouring
3.6. Care of varnishing
3.7. Decrease in value of the goods – ugly defects of colouring
3.8. Elimination of defects from blows of stones
3.9. Polishing of small scratches
3.10. Elimination of large scratches
3.11. Installation for a sink of glasses
3.12. Check of a screen wiper and стеклоомывателя
3.13. Water pouring in стеклоомыватель
3.14. Replacement of rubber of a brush of a screen wiper
3.15. Nozzle installation стеклоомывателя
3.16. Installation and nozzle dismantle стеклоомывателя
3.17. Dismantle and installation of the lever of a screen wiper
3.18. Dismantle and installation of the electric motor of a forward screen wiper
3.19. Dismantle and installation of the electric motor of a back screen wiper
4. Engines
5. Greasing system
6. Cooling system
7. System of injection of fuel
8. Ignition system
9. Fuel system
10. Transmission
11. A running gear
12. Brake system
13. The electrotechnical equipment
14. Electroschemes
15. Car salon
16. A body
17. Technical characteristics
18. The help at malfunctions
 






ba88fb63

3-18-demontazh-i-montazh-ehlektrodvigatelya-perednego-stekloochistitelya.html

3.18. Dismantle and installation of the electric motor of a forward screen wiper

Dismantle

 PERFORMANCE ORDER

  1. At first be convinced that the screen wiper engine is in rest position. Wring out then a wire on weight and dismantle the screen wiper lever as it is described above.
  2. Dismantle a lattice обтекателя (it is shown by arrows and...
  3. ... Pull out sheets обтекателя from fixing grooves.
  4. The screen wiper engine is dismantled together with system of draughts and levers. Release three fixing screws (are specified by arrows), remove a cable connector, disconnect a socket from the engine of a screen wiper and pull out then a screen wiper together with system of draughts from ventilating mine.
  5. Now note on an assembly plate position of the rotary lever, then dismantle the lever and unscrew the engine from an assembly plate.

    Dismantle обтекателя

    Screen wiper dismantle

    Dismantle of the engine of a screen wiper

Installation

 PERFORMANCE ORDER

  1. In the beginning screw the engine of a screen wiper with the moment of an inhaling 8 Нм on an assembly plate.
  2. Check up, that the engine was in a condition of a parking and...
  3. ... Establish the rotary lever according to executed marks and strongly screw up a nut the moment of an inhaling 26 Нм.
  4. Finish installation in return sequence of actions.
  5. Check up functioning and align nozzles of screen wipers on glass.

The previous page
3.17. Dismantle and installation of the lever of a screen wiper
The following page
3.19. Dismantle and installation of the electric motor of a back screen wiper