Ford Mondeo since 2000
1. Introduction
2. Equipment
3. Care of the car
3.1. Internal clearing – at a dirt is not present any chances
3.2. An external sink
3.3. An engine sink
3.4. That all remains in movement, address in greasing service
3.5. Wish to keep material assets – look after colouring
3.6. Care of varnishing
3.7. Decrease in value of the goods – ugly defects of colouring
3.8. Elimination of defects from blows of stones
3.9. Polishing of small scratches
3.10. Elimination of large scratches
3.11. Installation for a sink of glasses
3.12. Check of a screen wiper and стеклоомывателя
3.13. Water pouring in стеклоомыватель
3.14. Replacement of rubber of a brush of a screen wiper
3.15. Nozzle installation стеклоомывателя
3.16. Installation and nozzle dismantle стеклоомывателя
3.17. Dismantle and installation of the lever of a screen wiper
3.18. Dismantle and installation of the electric motor of a forward screen wiper
3.19. Dismantle and installation of the electric motor of a back screen wiper
4. Engines
5. Greasing system
6. Cooling system
7. System of injection of fuel
8. Ignition system
9. Fuel system
10. Transmission
11. A running gear
12. Brake system
13. The electrotechnical equipment
14. Electroschemes
15. Car salon
16. A body
17. Technical characteristics
18. The help at malfunctions
 



escort pas cher ba88fb63





3-7-snizhenie-cennosti-tovara-bezobraznye-defekty-okraski.html

3.7. Decrease in value of the goods – ugly defects of colouring

During driving you Mondeo is under «long bombardment» various extraneous subjects. Small rising stones, even tiny sandy grains at high rate of movement can turn to shells which, like meteorites, strike the blows to varnishing. On winter roads harm to forward details and an engine cowl – the firm particles scattered on road first of all is done – with noise drum on a body. Damages from blows such the stone is yet so big tragedy. Even the easy contact at a parking with the subsequent scratches and scars does not give an occasion to a panic. Such places, as well as another's varnishing of "opponent", it is possible to polish most likely with a varnish cleaner or grinding полиролем.

Practically after blows of stones – a repair set from Ford

Many manufacturers after «stone blows» offer a practical repair set. It can use easily, as nail polish. One more alternative – a door varnish with which help it is possible to fill scratches from blows by several varnish coats. In the presence of a usual varnish and small damages will help, however, and восковый a pencil on colour of the car. Repair wax, naturally, will sustain only a few sinks of the car and consequently again should be restored. If you have forgotten the name of a varnish and a code of colour of the car there are no problems: your dealer Ford will help to decipher the data of a numerical code in the passport on the car.

At once eliminate fresh "wounds"

Do not ignore even tiny defects in colouring: the rust in a short space of time will spend the big work – and under adverse conditions (dampness, heat or under the influence of salt) results will be already appreciable in some days. And in a month or year the rust will free expand the borders and as a sad result – large лунки deterioration or rusty holes. In this case will help only затратные restoration works about which we for you here, certainly, will adumbrate on an example of elimination of defects of sheet metal. For carrying out of such works it is recommended to glance in workshop Mondeo or 172nd of a series «I will help with that to myself». Experts here will give you the extensive information on all кузовным to works.

That all was got on – the correct material is necessary

    Gluing tape (use only a professional material). Newspapers or films for pasting. For the vulgar polishing grinding колодка from a tree or a stopper. Grinding paper for grinding with humidifying of dry polishing. Шпатель, шпаклевка and a hardener. First coat as a basis for new colouring. Integumentary varnish. Varnish cleaner, the conservative, polyrole.

«The previous page
3.6. Care of varnishing
The following page»
3.8. Elimination of defects from blows of stones