> Replacement of the shock-absorber (versatile person). Ford Mondeo (since 2000 of release)
Ford Mondeo since 2000
1. Introduction
2. Equipment
3. Care of the car
4. Engines
5. Greasing system
6. Cooling system
7. System of injection of fuel
8. Ignition system
9. Fuel system
10. Transmission
11. A running gear
11.1. Forward bridge Mondeo
11.2. The service factor – geometry of the forward bridge
11.3. Check of shock-absorbers – is obligatory after deterioration of two complete sets of tyres
11.4. Regular check of a free wheeling of a steering wheel
11.5. Check of protective cuffs gear рейки
11.6. Check of tips of cross-section steering draught and cuffs
11.7. Check of the bearing of the cross-section lever of a suspension bracket
11.8. Check of a backlash of the wheel bearing
11.9. Replacement of the forward cross-section lever of a suspension bracket
11.10. Dismantle and installation of an amortisation rack
11.11. Replacement of tips of cross-section steering draught
11.12. Replacement of cuffs of the steering mechanism
11.13. Replacement of a rotary support of the steering mechanism
11.14. Dismantle and installation of a back amortisation rack
11.15. Replacement of the shock-absorber (versatile person)
11.16. The steering mechanism with the amplifier
11.17. Tyres and disks
11.18. It is better to check on cold tyres – pressure of air
11.19. Wheel replacement
11.20. Check of a condition of tyres
12. Brake system
13. The electrotechnical equipment
14. Electroschemes
15. Car salon
16. A body
17. Technical characteristics
18. The help at malfunctions
 






ba88fb63 hydra ГИДРА onion Обзор - Анонимной площадки Новости IT в Москве

11-15-zamena-amortizatora-universal.html

11.15. Replacement of the shock-absorber (versatile person)

 PERFORMANCE ORDER

  1. Out of the blue put a back part of the car reliably on goats, in addition prop up the forward bridge a lining wedge and...
  2. ... Prop up the cross-section lever of a suspension bracket by means of a garage jack.
  3. Dismantle the shock-absorber. In the beginning unscrew bottom 1, and then the top fixing screw 1.

    Shock-absorber dismantle.

Installation with regulation of a road gleam

 PERFORMANCE ORDER

  1. Pay attention that the lock axis (it is specified by an arrow) on the top fastening of the shock-absorber has been directed outside.

    The lock axis should be directed outside.


    All models
  2. Instal upside-down and...
  3. ... Strongly tighten screws only when the car will rise again on wheels.

The previous page
11.14. Dismantle and installation of a back amortisation rack
The following page
11.16. The steering mechanism with the amplifier